Sign in
2021 Class
Changes 0
C

CurtainGridFamilyFailures

Description:
Failures about CurtainGrid Family.
Inheritance Hierarchy:
System.Object
  Autodesk.Revit.DB.BuiltInFailures.CurtainGridFamilyFailures
public static class CurtainGridFamilyFailures
Name Return Type Description
P AllMullionsAreTooShort FailureDefinitionId The mullion(s) you are trying to place is too short for his type, and was not placed on the grid.
P CannotCreateCornerMullionDueAngle FailureDefinitionId Can't create Corner Mullion due to the angle between the neighboring panels. Try changing the Parameters in the Curtain Wall Mullion Family.
P CannotCreateCurtainPanelCorruption FailureDefinitionId Can't create Curtain Panel. A Panel or a Mullion is probably too small.
P CannotCreateCurtainPanelError FailureDefinitionId
P CannotCreateCurtainPanelInOpeningCorruption FailureDefinitionId Can't create Curtain Panel in opening. The opening is probably too small.
P CannotCreateCurtainPanelInOpeningWarning FailureDefinitionId
P CannotGenerateAllNecessaryElements FailureDefinitionId Unable to regenerate all necessary elements.
P CannotPlaceSystemMullionFamilyOnCurtainWall FailureDefinitionId Can't place System Mullion Family on this Curtain Wall.
P CannotPlaceSystemPanelsInOldArcedCurtainWalls FailureDefinitionId Can't place System Panels in arced Curtain Walls created prior to 3.0, nor in straight Curtain Walls created prior to version 2.0.
P CornerMullionOverlapsOtherOnePlacedOnNeighboringRegion FailureDefinitionId Corner Mullion overlaps Mullion placed on neighboring Curtain region.
P CornerMullionsNeighborsMustBeTangent FailureDefinitionId Corner Mullions must be placed at a location that can have neighboring Panels that are not tangent. With the exception of Wall Join locations, Corner Mullions are not currently supported on the external boundaries of Curtain elements.
P CurtainPanelNotBelongsToElement FailureDefinitionId Curtain element Panel doesn't belong to Curtain element. In merging, you must select the version of a Curtain element that has had Panels added to it.
P CurtainPanelsParamDefinedTypeDefinedCirculary FailureDefinitionId Parameter-defined type of curtain panels defined in a circular way and default panel type will be used instead.
P CurtainSystemCouldnotReacquireFaces FailureDefinitionId Curtain System could not reacquire [Number] faces out of [Number].
P InvalidCurtainPanelInModel FailureDefinitionId There is an invalid Curtain Panel in the model. This is probably caused by two Grid Lines almost meeting at a border of the Curtain Wall or Sloped Glazing, but not exactly at a point. The Curtain Panel can't be displayed.
P MullionProfileContainsMoreThanOneOrOpenLoop FailureDefinitionId The selected mullion profile either contains more than one profile loop or an open profile loop and cannot be used. Valid profiles can only have a single continuous closed profile loop.
P NonSystemPanelFamiliesCannotBeUsed FailureDefinitionId Non-system panel families cannot be used for non-rectangular panels. If your panel is simple, create an appropriate panel type derived from the system panel family.
P PanelsSlightlyMalformedCorruption FailureDefinitionId Some panels in this curtain system are slightly malformed. The problem is most likely ignorable. This problem usually occurs when a panel or parts of a panel have been divided so that they are very narrow.
P PanelsSlightlyMalformedWarning FailureDefinitionId Some panels in this curtain system are slightly malformed. The problem is most likely ignorable. This problem usually occurs when a panel or parts of a panel have been divided so that they are very narrow.
P SomeMullionsAreTooShort FailureDefinitionId Some of the mullions you are trying to place are too short for its types, and were not placed on the grid.